Cardboard, PVC, and Plastic Core Cutting Machines

Pinnacle Converting's EZ Core Cutter is a productive addition to any converting operation. This machine gives your converting operator the ability to cut their own cores to a specific size in seconds! Its easy-to-use operation and lightweight table-top design makes this machine easy to locate near a converting machine! Core Cutter Spec Sheet

8-14" Core Cutter EZ Core CutterVideo With jQuery by VideoLightBox.com v1.10

Core Material and Ranges:

The EZ Core Cutter can cut cores made ofcardboard, fiberboard, corrugated plastic, and PVC. There are several models available based on core diameter.

• 1 to 3" Model
• 2 to 6" Model
• 3 to 8" Model
• 8 to 14" Model

Applications:

• Cuts plastic and PVC cores
• Cuts fiber board cores down to 1/4 in. wide
• cuts various diameter cores with out tooling change
• Cuts cores from .090" to .500" wall
• Recycle used and dented cores
• Razor clean cuts

Optional Upgrades:

• Reverse Stop Scale
• Left Hand Models
• Extended width stops

Features:

• Easy to change standard disposable utility blades
• Compact bench top design
• Core stop and scale for repeatability and accuracy
• Standard 110V service
• No tooling required 

---

"We purchased the EZ Core Cutter from Pinnacle a couple of years ago with the intentions of saving money on new paper cores. This machine has allowed Bondcote to utilize all paper cores that are damaged on one end or both. We can cut off the bad edges and use the rest of the core for slit products which we use the slitter we purchased from Pinnacle also. This machine has reduced our cost which allows us to be more competitive in the marketplace, and has reduced our waste going to the landfill by 65% annually."

-Donnie Kemp, Plant Manager, Bondcote Corporation