Applications:
Cuts fiber
board cores down to ¼” wide
±.030” cut
tolerance, Clean Edge
2” to 6” diameter
cores with out changing
Cuts cores from
.090" to .500" wall
Recycle used
cores
Optional
Upgrades:
Left Hand Models
Extended width
Core range from
1" to 3 "
Core range from
3" to 8 "
Features:
Razor clean
cuts
Easy to change
standard disposable utility blades
Compact bench
top design
Core stop and
scale for repeatability and accuracy
|
1. Lift
the cutter arm
and load the core to be cut onto drive wheels.
2. Make sure the blade extension is sufficient for the wall thickness
to be cut.
3. Set the core stop to the length desired. A quick clamp and scale
make this easy.
4. If necessary, adjust the handle pull pressure to avoid excessive
or low clamping force on the core.Moving a simple spring pin is all that
is required.
5. Adjust the kick guide to the core outside diameter with the simple
thumb wheel.
6. Bring the handle down so the blade lightly contacts the core then
push the start button with your other hand.
7. Continue gentle pressure until the core is severed.
8. Lift the handle, slide the core to the stop, and repeat as necessary. |
 |
|
